Filter
Top Products
Connecting to another VCR
The video and audio signals are sent to another VCR with virtually no
deterioration in quality, enabling high-quality recording. The signal flow is
automatically detected so you do not need to make separate connections
for input and output.
Recorder Player
Monitor
DSR-11
Other VCR
to
the
LANC jack
LANC cable (not supplied)
i.LINK cable (DV cable) (not supplied)
to
the
DV jack
Signal flow
• Set DV EE OUT on the VTR SET menu to OFF.
For details on the VTR SET menu, see "VTR SET menu" on page 43 .
• With the DV connection, the sound is recorded in the same audio
recording mode as that of the source tape. To record in a different audio
recording mode from the source tape, use the analog connection instead.
• With the DV connection, data codes (recording date/time, camera data)
recorded on the source tape are transmitted from this unit (player). As a
result, when you play back a recorded tape on this unit and press the
DATA CODE button on the Remote Commander, the same data codes
recorded on the source tape are displayed on the monitor screen.
• As for the LANC connection, see "Notes for a LANC connection" on the
next page.
Chapter 2 Playback and Recording
21