Sony J30SDI Clock Radio User Manual


 
Chapter 7 Setup Menu
Chapter 7 Setup Menu 7-5
625
525/625 SYSTEM SELECT
POWER off/on!!
625
525/625 SYSTEM SELECT
Push SET button!!
Current active
menu settings
Recall
Save
Menu bank 1
Recall
Save
Menu bank 2
4 Holding down the JOG/SHUTTLE button, turn the
JOG/SHUTTLE dial to change the setting from
525 to 625.
The displays change as follows.
To cancel the 525/625 setting operation
Holding down the SHIFT button, press the SET/
MENU button the required number of times to exit
from the menu.
5 Press the SET/MENU button.
The displays change as follows.
6 Turn the POWER switch off momentarily, then
turn it on again.
This switches from the 525 (NTSC) to the 625
(PAL) system; the 525 indicator goes off, and the
625 indicator lights.
The menu settings disappear from the time data
display area, and returns to the normal indications.
Menu bank operations (basic menu items
B01 to B12)
This unit allows two different complete sets of menu
settings to be saved in what are termed “menu banks,”
numbered 1 and 2. Saved sets of menu settings are
recalled for use as required.
To jump to menu item B01 or H01
The unit recalls any required menu items when you
turn the JOG/SHUTTLE dial after pressing the SET/
MENU button while holding down the SHIFT button.
Press the SET/MENU button while holding down the
SHIFT button, then press the CTL/TC/UB button.
Every time you press the CTL/TC/UB button, menu
item H01 or B01 is recalled alternately.
Saving the current active menu settings
Set menu item SAVE BANK 1, basic menu item B11,
or SAVE BANK 2, basic menu item B12, to ON,
depending on which of the menu banks you wish to
use to save the setting, then press the SET/MENU
button.
Recalling settings from a menu bank
Set menu item RECALL BANK 1, basic menu item
B01, or RECALL BANK 2, basic menu item B02, to
ON, depending on which of the menu banks you wish
to recall settings from, then press the SET/MENU
button.
Time data display area
Monitor screen
Time data display area
Monitor screen
You can see
“POWER OFF/ON”
by scrolling the
indication.