Filter
Top Products
Chapter 4 Playback
Chapter 4 Playback 4-1
SHIFT button
Cassette compartment
PLAY button
Chapter 4
Playback
4-1 Playback Procedures
If you play back to the end of the tape
The tape is automatically rewound, and stops.
(When AUTO REWIND, extended menu item 125, is
set to ENA)
Notes
• If you playback a Betacam/Betacam SP cassette
immediately after playing back a Betacam SX
cassette or Digital Betacam cassette, it may take
several seconds for playback to start.
• This unit uses an auto-tracking function (when using
the Digital Betacam or MPEG IMX format). The
factory setting for the auto-tracking is on (AUTO
TRACKING ON). You can turn auto-tracking off.
For details on how to change the setting, contact your
nearest Sony dealer. While this unit is pulling the
tape in, the PLAY button indicator B flashes.
When using the Dolby C NR system
When using an analog Betacam cassette, you can use
Dolby C NR for audio playback.
To activate the Dolby NR system, press the AU MON
SEL/DOLBY C NR button while holding down the
SHIFT button on the control panel.
STOP button
AU MON SEL/
DOLBY C NR button
4-1-1 Normal Playback
Insert a cassette beforehand.
For details of how to insert a cassette, see the section
“Inserting and ejecting cassettes” on page 3-2.
To start playback
Press the PLAY button.
To stop playback
Press the STOP button.