Filter
Top Products
7-2 Menu Operations
Chapter 7 Setup Menu
7-2 Chapter 7 Setup Menu
SHIFT button
SET/MENU button
Item number
(flashing)
Item name (first four
characters)
Cursor indicating
the currently
selected item
JOG/SHUTTLE button
JOG/SHUTTLE dial
JOG/SHTL indicator
*HO1:OPE HOURS - 102
HO2:DRUM HOURS - 52
-------
7-2 Menu Operations
This section describes the basic menu displays and
how to change the settings.
For information about how to use basic menu item 013, see
“Switching between 525/625 line systems (basic menu item
013)” on page 7-4, and for information about how to
operate items B01 to B12, see “Menu bank operations
(basic menu items B01 to B12)” on page 7-5.
For information about how to use the extended menu, see
the section “Extended menu operations” on page 7-6.
Displaying the menus
Press the SET/MENU button while holding down the
SHIFT button.
The setting of the currently selected menu item
appears in the time data display area.
Displaying the menus on the monitor
Menu setting can be done on the monitor while
superimposing is set to ON.
If the SET/MENU button is pressed while holding
down the SHIFT button to display the menu settings in
the time data display area, a full-screen version also
appears on a monitor connected to the COMPOSITE
(SUPER) output connector, SDI (SUPER) output
connector (J-10SDI/30SDI only), or
DV connector as
shown in the above figure.
Changing the currently displayed menu
item
Turn the JOG/SHUTTLE dial.
Turning the JOG/SHUTTLE dial to the right
increments the item number and turning it to the left
decrements the item number.
The item number changes at a rate depending on the
JOG/SHUTTLE dial position (when the SHTL
indicator is lit) or on the JOG/SHUTTLE dial rotation
rate (when the JOG indicator is lit).
Time data display area