Filter
Top Products
Changing the settings 12
33
En
English
Français Español
Connecting using PIN Input
1 Press SET UP and select Network Setting
WPS
PIN Input
, then press
ENTER
.
2Use
/
to select the access point which
you want to connect, then press
ENTER
.
3 Confirm the PIN code of this unit, then press
ENTER
.
The PIN code of this unit is shown on the main display.
You must check this PIN code to connect to the network.
4 Within 2 minutes after closing the PIN Code
message, input the PIN Code to the access point
selected in step 2.
• The PIN Code input method differs depending on the
LAN device used. For details, consult the operating
instructions accompanying your LAN device.
Friendly Name
1 Press
SET UP
.
2Select
Network Setting
Friendly Name
.
3Use
///
to enter
Friendly Name
,
then press ENTER.
• /: Moves the adjusting digit.
• /: Changes displayed character.
• SOUND: Switches character types.
• CLEAR: Deletes one characters at a time.
Parental lock setup
Restrict internet radio access for children. When Internet
Parental Lock is set to On, you cannot listen to internet radio
without entering a password.
1
Turn on/off the parental lock
1 Press
SET UP
.
The Initial Setup screen is displayed on the main display.
2 Select Option Setting
Internet Parental
Lock
Internet Parental Lock
.
3Use
///
or number buttons to enter
the password, then press ENTER.
• /: Moves the adjusting digit.
• /: Increases or decreases numbers.
• CLEAR: Deletes one characters at a time
•The factory default setting is "0000".
4Use
/
to select
On
or
Off
, then press
ENTER
.
Changing the password
1 Press
SET UP
.
The Initial Setup screen is displayed on the main display.
2 Select Option Setting
Internet Parental
Lock
Change Password
.
3Use
///
or number buttons to enter
the current password, then press ENTER.
4Use
///
or number buttons to enter
the new password, then press ENTER.
•If you press RETURN, the previous screen will be
displayed.
Available Wireless Networks
AAAAA
BBBBB
CCCCC
DDDDD
87654321
[ENTER] OK
Note
1Even if Internet Parental Lock is set to On, automatic clock adjustments using network will work.
X-SMC3_CUXZTSM_En.book 33 ページ ２０１１年６月７日 火曜日 午前４時４７分