Filter
Top Products
Using the tuner10
26
En
Chapter 10:
Using the tuner
Listening to the FM radio broadcasts
The tuner can receive FM broadcasts, and can save your
favorite stations.
1 Press
FUNCTION /
to select Tuner.
The tuned frequency will be displayed on the main display.
2 Tune into a station.
When the tuner receives FM broadcasts, the TUNE indicator
lights.
There are two ways to do this:
Automatic tuning - To search for stations, press and
hold
TUNE +/– for about a few seconds. This unit will
start searching for the next station, stopping when it has
found one. Repeat to search for other stations.
Manual tuning - To change the frequency one step at
a time, press TUNE +/–.
Saving stations
You can save up to 9 station presets so that you always have
easy access to your favorite stations without having to tune in
manually each time.
1
• Manually saving station presets
1 Press
FUNCTION /
to select Tuner.
The tuned frequency will be shown on the main display.
2 Tune into a station.
3 Press and hold a number button (1 to 9) for
a few seconds.
The tuned frequency is preset to the selected number button.
The previous station preset is overwritten.
• Automatically saving station presets
1 Press and hold
PRESET +
for a few seconds.
Auto tuning starts.
• The tuned frequencies will be preset to the buttons in
numerical order.
• Auto tuning stops after the FM band has finished, or the
limit of 9 presets has been reached.
Listening to station presets
1Press
FUNCTION /
to select Tuner.
The tuned frequency will be shown on the main display.
2 Press the number button (1 to 9) that stores
the FM radio station.
Tip
•Press PRESET +/- repeatedly to selected the station
preset in numerical order.
Note
1 When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will be overwrit-
ten with the new one.
X-SMC3_CUXZTSM_En.book 26 ページ ２０１１年６月７日 火曜日 午前４時４７分