Filter
Top Products
Getting started04
14
En
Chapter 4:
Getting started
When you use the unit for the first time, the following screens
will be displayed.
Set up the following items to customize the unit.
1 Press
STANDBY/ON
.
About twenty seconds after turning on the power, the
following splash screen appears. About one minute is
required between turning the power on and completion of
startup.
Setting Quick Start Mode to On will allow faster startup
(page 29).
2Use
PLAY
to activate Demo Mode or use
STOP
to deactivate Demo Mode.
The screen below will automatically appear after the screen in
step 1.
• Demo Mode also can be activated in Auto mode select
(page 29).
• When Start is selected, the demo mode operates. When
starting up the next time, it will be necessary to set step
3.
•If Cancel is selected, operation will automatically
proceed to step 3.
3Use
/
to select the menu language of this
unit, then press
ENTER
.
The setting is done.
Select "Start" to start
Demo mode; otherwise
"Cancel".
[PLAY] Start
[STOP] Cancel
Language
Français
Deutsch
Nederlands
English
X-SMC3_CUXZTSM_En.book 14 ページ ２０１１年６月７日 火曜日 午前４時４７分