Filter
Top Products
Bluetooth
®
Audio playback (optional)
06
19
En
English
Français Español
2 Press
STANDBY/ON
to turn the power on.
3 Press
FUNCTION /
or
BT AUDIO
on the
top panel of the unit to select
BT AUDIO
as the
input source.
1
The BT AUDIO indicator lights and BT Audio is shown on the
main display.
Setting the PIN code
Set this unit’s PIN code to the same setting as that for the
Bluetooth wireless technology device used. Supported PIN
code setting values include 0000, 1234 or 8888.
• Default setting: 0000
1 Press
FUNCTION /
or
BT AUDIO
on the
top panel of the unit to select
BT Audio
as the
input source.
The BT AUDIO indicator lights and BT Audio is shown on the
main display.
2 Press
SET UP
.
3Use
/
to select Option Settings
BT PIN
Select, then press
ENTER
.
4Use
/
to select the PIN code, then press
ENTER
.
The PIN code is stored.
Pairing
Bluetooth
®
adapter and
Bluetooth
wireless technology device
“Pairing” must be done before you start playback of Bluetooth
wireless technology content using Bluetooth
®
adapter. Make
sure to pair devices the first time you operate the system or
any time pairing data is cleared. “Pairing” is the step
necessary to register Bluetooth wireless technology device to
enable Bluetooth communications.
2
For more details, see
also the operating instructions of your Bluetooth wireless
technology device.
1 Press
FUNCTION /
or
BT AUDIO
on the
top panel of the unit to select
BT Audio
as the
input source.
The BT AUDIO indicator lights and BT Audio is shown on the
main display.
2 Turn on the
Bluetooth
wireless technology
device that you want to pair, place it near the
system and set it into pairing mode.
Pairing starts.
3 Check to see that the
Bluetooth
®
adapter is
detected by the
Bluetooth
wireless technology
device.
•If the Bluetooth wireless technology device cannot be
connected to the unit, perform the connection operation
from the Bluetooth wireless technology device.
Listening to music contents of
Bluetooth
wireless technology device
1 Press
FUNCTION /
or
BT AUDIO
on the
top panel of the unit to select
BT Audio
as the
input source.
The BT AUDIO indicator lights and BT Audio is shown on the
main display.
2 Make connection between the
Bluetooth
wireless technology device and the unit.
• See Pairing Bluetooth® adapter and Bluetooth wireless
technology device above.
Note
1When the Bluetooth
®
adapter is not connected and BT Audio is selected as the input source, the error message BT Adapter Not
Connected will be shown on the main display.
Option Setting
Volume Limit Setting
Internet Parental Lock
AutoMode Change
BT PIN Select
2 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth
®
adapter.
• To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology device.
X-SMC3_CUXZTSM_En.book 19 ページ ２０１１年６月７日 火曜日 午前４時４７分