Filter
Top Products
English
RQT6087
Timer Operations
1
Perform steps 1 to 13 of the Timer Play (wake-
up play) procedure. (see page 43)
2
When “PLAY” is flashing in the information
display, turn the MULTI JOG control on the
main unit to select “REC”.
3
Press the SET button.
4
Turn the MULTI JOG control on the main unit
within 30 seconds after step 3 to select the
source to be recorded from.
5
Press the SET button.
6
Load a recordable CD-R or CD-RW disc into the
CDR.
• The disc is read.
7
Set the power to standby mode.
• The present time is shown in the information display.
Notes
• Match the timer of the connected source with the unit’s setting.
• Recording starts at the programmed start time, and the power
will be switched to back to the standby mode at the pro-
grammed end time. (The unit power is turned on about two min-
utes before the programmed start time.)
• When an operation is completed once using the Once Timer
mode, the timer program is cleared.
• If digital signals are not received when timed recording starts
using the DIGITAL IN setting, “UNLOCK” is shown in the
information display and no signals will be recorded.
• When using the timer to record a digital satellite broadcast pro-
gram, for instance, check to see if the broadcast station with the
program you want to record is tuned in correctly before pro-
gramming the timer start and end times.
Timer Recording (Unattended
Recording from a Broadcast
Receiver or Other Source)
MAXMIN
PLAY MODE
PHONES
OPEN /
CLOSE
REC SELECTOR
MIX BALANCE
MULTI JOG
REC LEVEL
+
–
CANCELSETMENU
REC/
REC MUTE
SYNCHRO
CD EDIT CD REC
FINALIZE
LINECDDIGITAL
POWER
COMPACT DISC RECORDER SL-PR300
DISC
1
DISC
2
DISC
3
OPEN /
CLOSE
DISC
SELECTOR
3
2
1
LINE
CD
3,5
2,4
7
6
MULTI JOG
REC LEVEL
+
–
SET
MULTI JOG
REC LEVEL
+
–
SET
SL-PR300PP.fm Page 45 Thursday, August 30, 2001 1:37 PM