Filter
Top Products
RQT6087
Special Recording Edit Operations
When performing digital synchronized start recording of an exter-
nally connected digital source, synchronized start recording begins
when a digital signal is encountered in the record pause mode.
However, it is also possible to set this unit to start and stop record-
ing when you are recording a single track.
1
When the unit is in stop mode, press the MENU
button (main unit/remote control).
2
Turn the MULTI JOG on the main unit or press
the
P
/
p
button on the remote control until “D-
IN SYNCHRO” appears in the display.
3
Press the SET button (main unit/remote control).
• The current setting appears in the display.
4
Turn the MULTI JOG on the main unit or press
the
P
/
p
button on the remote control to select
“START” or “START&STOP”.
• When “START” is selected, only the start of the digital signal is
recorded synchronously.
• When “START&STOP” is selected, both the start and stop of
single track recording are controlled by information in the
source digital signal.
• Press the CANCEL button if you do not want to perform this
procedure. The setting is not changed.
5
Press the SET button (main unit/remote control).
• Please note that the type of synchronized recording being per-
formed as set in the above procedure is not indicated in the display
during actual recording. Even when recording is started, only the
“SYNCHRO” indicator remains lit until recording is stopped.
• Even if this setting is set to “START&STOP”, recording is con-
cluded automatically if the source is stopped, the disc is
changed, or if a track search is performed.
Note
• Pressing the SYNCHRO button when unlocked displays
“UNLOCK” in the information window and releases the syn-
chronized condition.
By performing the following procedure, all menu settings stored in
the unit are cleared and the unit is reset to the factory default settings.
1
When the unit is in stop mode, press the MENU
button (main unit/remote control).
2
Turn the MULTI JOG control on the main unit or
press the
P
/
p
(menu) button on the remote
control until “SET DEFAULT” is shown in the
information display.
3
Press the SET button (main unit/remote control).
•“SET DEFAULT?” is shown in the information display.
• Press the CANCEL button (main unit/remote control) if you do
not want to perform this procedure.
4
Press the SET button (main unit/remote control).
• The unit is reset to the factory default settings and returns to the
stop mode.
Setting Up Synchronized Start
Recording for External Digital
Sources (CD, MD, and DAT only)
MAXMIN
PLAY MODE
PHONES
OPEN /
CLOSE
REC SELECTOR
MIX BALANCE
MULTI JOG
REC LEVEL
+
–
CANCELSETMENU
REC/
REC MUTE
SYNCHRO
CD EDIT CD REC
FINALIZE
LINECDDIGITAL
POWER
COMPACT DISC RECORDER SL-PR300
DISC
1
DISC
2
DISC
3
OPEN /
CLOSE
DISC
SELECTOR
3
2
1
LINE
CD
1 3,5
2,4
CANCE
L
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTE
REC
SELECTOR
MENU
PITCH
0
CANCEL
REPEAT CD
PITCH
+
SET
PITCH–
COMPACT DISC RECORDER
RAK-PR300
CD-R/RW
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
0 10
FA DE SYNCHRO
DISC SELECTOR
_>
CONTROL
2,4
3,5
1
CANCEL
At the time of purchase
DUB- SPEED HIGH (CD- R:4x,CD- RW:2x)
FINALIZE OFF
AUTO TRACK ON
TRACK SPACE ON
CONVERTER ON
D- IN SYNCHRO START
LINE IN GAIN LOW
Resetting the Unit to the
Factory Default Settings
MAXMIN
PLAY MODE
PHONES
OPEN /
CLOSE
REC SELECTOR
MIX BALANCE
MULTI JOG
REC LEVEL
+
–
CANCELSETMENU
REC/
REC MUTE
SYNCHRO
CD EDIT CD REC
FINALIZE
LINECDDIGITAL
POWER
COMPACT DISC RECORDER SL-PR300
DISC
1
DISC
2
DISC
3
OPEN /
CLOSE
DISC
SELECTOR
3
2
1
LINE
CD
1 3,4
2
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTE
REC
SELECTOR
MENU
PITCH
0
CANCEL
REPEAT CD
PITCH
+
SET
PITCH–
COMPACT DISC RECORDER
RAK-PR300
CD-R/RW
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
0 10
FA DE SYNCHRO
DISC SELECTOR
_>
CONTROL
2
3,4
1
CANCEL
CANCEL
SL-PR300PP.fm Page 40 Thursday, August 30, 2001 1:37 PM