Filter
Top Products
RQT6087
Timer Operations
14
Press the SET button.
•“PLAY” is displayed.
• If “REC” flashes rather than “PLAY”, turn the MULT JOG con-
trol until “PLAY” is shown flashing.
Note
• If the CANCEL button is pressed while setting the minutes col-
umn, the procedure returns to the previous step, and the hour
column starts flashing. This is convenient for correcting the
hour column.
15
While “PLAY” is flashing, press the SET
button.
16
Turn
the MULTI JOG control on the main unit
to set the function to CD or CDR.
17
Press the SET button.
• The Daily Timer “DAILY” indicator is shown in the display
window confirming that the play mode is set.
• When setting the ONCE TIMER, the “ONCE” indicator is shown
in the display window confirming that the play mode is set.
Example: DAILY TIMER
18
Set the power to standby mode.
Notes
• Make sure that the unit is put in standby for timer functions to
operate.
• Match the connected receiver or other source with the unit’s set-
ting, and adjust the volume to the appropriate level.
• Timer play starts at the programmed start time, and the power is
switched to the standby mode at the programmed end time.
(The unit power is turned on about two minutes before the pro-
grammed start time.)
Clearing a timer operation
- From Standby Mode
1
Press the MENU button to display “DAILY
TIMER” or “ONCE TIMER”.
2
Press the CANCEL button (main unit/remote
control).
•“DAILY OFF” or “ONCE OFF” is shown in the information
display, the DAILY p (or ONCE p) indicator is cleared from
the display window, and the timer operation is canceled.
- With Unit Power Turned On
1
Follow steps 1 through 5 in "Timer Play (wake-
up play)" to display "DAILY TIMER" or "ONCE
TIMER".
2
Press the CANCEL button (main unit/remote
control).
•“DAILY OFF” or “ONCE OFF” is shown in the information
display the DAILY p (or ONCE p) indicator is cleared from
the display window, and the timer operation is canceled.
MULTI JOG
REC LEVEL
+
–
SET
Time forward
Time
backward
Turn the MULTI JOG control
until “AM 8:15” is displayed.
Press the SET button.
“PLAY” is displayed.
SET
The timer programming is
displayed once, and then the
normal display is restored.
SET
DAILY
MAXMIN
PLAY MODE
PHONES
OPEN /
CLOSE
REC SELECTOR
MIX BALANCE
MULTI JOG
REC LEVEL
+
–
CANCELSETMENU
REC/
REC MUTE
SYNCHRO
CD EDIT CD REC
FINALIZE
LINECDDIGITAL
POWER
COMPACT DISC RECORDER SL-PR300
DISC
1
DISC
2
DISC
3
OPEN /
CLOSE
DISC
SELECTOR
3
2
1
LINE
CD
1
2
MAXMIN
PLAY MODE
PHONES
OPEN /
CLOSE
REC SELECTOR
MIX BALANCE
MULTI JOG
REC LEVEL
+
–
CANCELSETMENU
REC/
REC MUTE
SYNCHRO
CD EDIT CD REC
FINALIZE
LINECDDIGITAL
POWER
COMPACT DISC RECORDER SL-PR300
DISC
1
DISC
2
DISC
3
OPEN /
CLOSE
DISC
SELECTOR
3
2
1
LINE
CD
1
2
SL-PR300PP.fm Page 44 Thursday, August 30, 2001 1:37 PM