Filter
Top Products
English
RQT6087
Recording onto CD-R/RW Discs
If tracks have already been programmed for the CDs, “LAST P-PG
OK?” is shown in the information display. Press the SET button on
either the remote control or the main unit or press the PLAY button
on the main unit to record the same programmed tracks.
Recording starts.
To program new tracks, press the CANCEL button and then pro-
ceed to step 4.
• If you press the CANCEL button, the playing time remaining
time on the CD-R or CD-RW disc in the CDR is shown in the
information display.
4
Select and enter the disc number.
• The disc source can be selected using the MULTI JOG control
on the main unit or the R
/
F
buttons on the remote con-
trol.
• When the SET button (main unit/remote control) is pressed, the
programming and track numbers shown in the information dis-
play start flashing.
5
Select and enter a track number.
• After the track is entered, the amount of time remaining on the
CD-R or CD-RW disc is shown in the information display.
6
Repeat steps 4 and 5 to continue programming
tracks.
• Up to 32 steps can be programmed. The same track may be pro-
grammed more than once.
• Programming ends when 32 steps have been registered or if
there is no more time remaining on the CD-R or CD-RW.
7
Press the CDR Control PLAY
p
or
1
REC/REC
MUTE button on the main unit or the
1
REC/REC
MUTE button on the remote control.
When “ADD FINALIZE?” is shown in the information
window:
• No response (no input) assumes that finalization is to be per-
formed, or you can press the SET button (main unit/remote con-
trol) to confirm that finalization is to be done. Press the
CANCEL button (main unit/remote control) to keep the disc
unfinalized.
Note
• This message will not be shown if the menu FINALIZE func-
tion setting is “ON”. The default setting is “OFF”.
When a blank disc is in the CDR tray, “UPDATE OPC” is shown
following “ADD FINALIZE?”.
The recording process starts.
• Only the tracks selected from the CDs in the 3-CD changer are
recorded.
• Playback starts from the first track selected. The playing time of
the track and the remaining playing time of the CD-R or CD-
RW disc are shown in the information display.
• As high-speed recording is performed (CD-R 4x, CD-RW 2x),
there is no audio output during the recording process.
When recording completes
“STOP DUBBING” flashes and recording automatically stops.
When recorded without canceling "ADD FINALIZE?"
“FINALIZE” is shown in the information window after recording
is stopped and finalization is automatically performed.
To stop the recording at any time
Press the CD Control STOP s or CDR Control STOP s button on
the main unit or the s (stop) button on the remote control to stop
the recording process. The recording mode is released after “STOP
DUBBING” is shown in the information display.
MULTI JOG
REC LEVEL
+
–
SET
1. Select the disc. 2. Enter the selection.
MULTI JOG
REC LEVEL
+
–
SET
1. Select the track.
2. Enter the selection.
SL-PR300PP.fm Page 31 Thursday, August 30, 2001 1:37 PM