Filter
Top Products
English
RQT6087
Recording onto CD-R/RW Discs
4
Turn the MULTI JOG control or press the
P
/
p
(menu) button on the remote control and
choose the setting “TR SPACE ON” or “TR
SPACE OFF”.
• Press the CANCEL button (main unit/remote control) to cancel
the procedure and return to the normal display.
5
Press the SET button.
Notes
• There is no indicator to show the status of this function.
• This function will work when you begin recording from the
recording pause mode except when performing synchronized
one-button recording.
This unit offers the ability to record from various external sources
to the CDR using synchronized START and START&STOP func-
tions. This feature is applicable to external digital audio equipment
connected via the DIGITAL IN OPTICAL and COAXIAL termi-
nals and the LINE IN (REC) terminal.
• Synchronized recording to the CDR from an external
source.
1
Load a recordable CD-R or CD-RW disc in the
CDR tray.
• The disc is read if required.
2
Press the REC SELECTOR button on the main
unit or the remote control repeatedly to select
the recording source.
• Each press of the selection button on either the main unit or
remote control, toggles one step through the following source
choices.
OPTICAL IN: Record digital signals via the OPTI-
CAL terminal.
COAXIAL IN: Record via the COAXIAL terminal.
CD DIGITAL: Record digital signals from 3-CD
changer.
CD ANALOG: Record analog signals from 3-CD
changer.
LINE IN: Record via the LINE IN terminal.
CD+LINE MIX: Record via 3-CD changer and LINE
mix.
3
Press the SYNCHRO button (main unit/remote
control).
• The CDR is put into the synchronized recording pause mode.
• The source device must be stopped at this time.
4
Start playing of the source unit
Notes
• When recording with the SYNCHRO button, recording starts
when the input level is detected. If the track starts very quietly
(with a low input level), the beginning of the track may not be
recorded. When recording from an analog source, such as records
or tapes, recording may not start if the recording level is too low.
When this occurs, please perform manual recording.
Performing synchronized recording of a digital source
• Recording is started based on the digital signal.
• Track marking is based on track information recorded in the
digital signal. For digital sources other than CD, MD and DAT,
track marking is based on silent track space.
Performing synchronized recording of an analog source
• Recording is started when the unit detects an audio signal.
• Track marking is based on silent track space which the unit
interprets to be track breaks. If automatic track marking has
been turned off, manual track marking is necessary during the
recording process.
To stop recording at any time
Press the CDR Control STOP s button on the main unit or the s
(stop) button on the remote control.
Synchronized Recording from
External Sources
MAXMIN
PLAY MODE
PHONES
OPEN /
CLOSE
REC SELECTOR
MIX BALANCE
MULTI JOG
REC LEVEL
+
–
CANCELSETMENU
REC/
REC MUTE
SYNCHRO
CD EDIT CD REC
FINALIZE
LINECDDIGITAL
POWER
COMPACT DISC RECORDER SL-PR300
DISC
1
DISC
2
DISC
3
OPEN /
CLOSE
DISC
SELECTOR
3
2
1
LINE
CD
3
1
2
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTE
REC
SELECTOR
MENU
PITCH
0
CANCEL
REPEAT CD
PITCH
+
SET
PITCH–
COMPACT DISC RECORDER
RAK-PR300
CD-R/RW
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
0 10
FA DE SYNCHRO
DISC SELECTOR
_>
CONTROL
3
2
s
s
SL-PR300PP.fm Page 33 Thursday, August 30, 2001 1:37 PM