Filter
Top Products
RQT6087
Special Recording Edit Operations
Occasionally, there may be tracks on a disc that are partial,
repeated, or are otherwise unwanted. Before a CD-R or CD-RW is
finalized, it is possible to enter a skip marker for that track in the
PMA (Program Memory Area). A maximum of 21 skip marks can
be inserted on one disc. When a disc is finalized, the information of
tracks assigned a skip mark is written to the disc’s TOC (Table of
Contents) and those tracks will never be played (i.e., just as if they
had never been recorded.)
Note
Once a skip marker has been entered for a track, it can-
not be removed.
1
When the unit is in the stop mode, press the
MENU button (main unit/remote control).
2
Turn the MULTI JOG control or press the
P
(menu) button on the remote control until
“TRACK SKIP” is shown in the information
display.
3
Press the SET button (main unit/remote
control).
•“SKIP (track number)?” is shown in the information display.
• Press the CANCEL button (main unit/remote control) if you do
not wish to perform this procedure.
4
Turn the MULTI JOG control or press the
P
/
p
(menu) button on the remote control to select
the track number to be skipped.
5
Press the SET button (main unit/remote control).
• A skip marker is entered into the PMA for the selected track and
WRITE SKIP is shown in the information display. When the
process is finished, the normal display is shown.
• The track to be skipped is cleared from the music calendar.
Notes
• Even if a track is skipped, the recorded information is not erased
and the time remaining on the CD-R or CD-RW does not
change.
• Tracks that have been assigned a skip marker are only skipped
during playback on this unit and other CD players that support
the track skip function.
• You cannot use the track skip function when recording to unfi-
nalized CD-R discs or CD-RW discs from the 3-CD changer.
1
Load the unfinalized CD-RW to be edited in the
CDR disc tray.
• The number of tracks and play time are shown in the informa-
tion display.
2
When the unit is in the stop mode, press the
MENU button (main unit/remote control).
3
Turn the MULTI JOG control or press the
P
/
p
(menu) button on the remote control until
“TRACK ERASE” is shown in the information
display.
*Please refer to the Glossary for a brief definition of acronyms.
(see page 48)
Skipping a Recorded Track on a
CD-R or CD-RW (Track Skip)
MAXMIN
PLAY MODE
PHONES
OPEN /
CLOSE
REC SELECTOR
MIX BALANCE
MULTI JOG
REC LEVEL
+
–
CANCELSETMENU
REC/
REC MUTE
SYNCHRO
CD EDIT CD REC
FINALIZE
LINECDDIGITAL
POWER
COMPACT DISC RECORDER SL-PR300
DISC
1
DISC
2
DISC
3
OPEN /
CLOSE
DISC
SELECTOR
3
2
1
LINE
CD
3,5
2,4
1
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTE
REC
SELECTOR
MENU
PITCH
0
CANCEL
REPEAT CD
PITCH
+
SET
PITCH–
COMPACT DISC RECORDER
RAK-PR300
CD-R/RW
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
0 10
FA DE SYNCHRO
DISC SELECTOR
_>
CONTROL
2,4
3,5
1
CANCEL
CANCEL
Erasing a Track or Tracks
(Erase Function) (CD-RW only)
MAXMIN
PLAY MODE
PHONES
OPEN /
CLOSE
REC SELECTOR
MIX BALANCE
MULTI JOG
REC LEVEL
+
–
CANCELSETMENU
REC/
REC MUTE
SYNCHRO
CD EDIT CD REC
FINALIZE
LINECDDIGITAL
POWER
COMPACT DISC RECORDER SL-PR300
DISC
1
DISC
2
DISC
3
OPEN /
CLOSE
DISC
SELECTOR
3
2
1
LINE
CD
2 4,6
3,5
1
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTE
REC
SELECTOR
MENU
PITCH
0
CANCEL
REPEAT CD
PITCH
+
SET
PITCH–
COMPACT DISC RECORDER
RAK-PR300
CD-R/RW
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
0 10
FA DE SYNCHRO
DISC SELECTOR
_>
CONTROL
3,5
4,6
2
CANCEL
SL-PR300PP.fm Page 36 Thursday, August 30, 2001 1:37 PM