Filter
Top Products
English
RQT6087
Power STANDBY/ON Operations
To turn power to the unit on
Press the POWER ( ) button on the front panel or remote
control.
• The currently selected CD function is shown in the information
display.
To put the unit in standby mode during operation
Press the POWER ( ) button on the front panel or remote
control.
• The clock display is shown in the information display. It flashes
if the clock has not been set.
If the POWER ( ) button is pressed during a recording oper-
ation, the standby lamp flashes while the unit brings the operation
to an end. Once the operation has stopped, the unit enters the
standby mode and the standby lamp lights steady. From the time
the button is pressed until the standby lamp lights steady, the unit
will not respond to any button pressed on the front panel of the
main unit or remote control.
Turning the power on by pressing a function
button when the unit is in the standby mode
The unit can be turned on and a function selected simply by press-
ing one of the buttons shown in the figure below
• When the PLAY p button for either the 3-CD changer or CDR
is pressed on the main unit, the power is turned on and the cor-
responding tray is selected. If a disc is loaded in the selected
tray, playback begins.
• When one of the 3-CD changer OPEN/CLOSE 0 buttons or the
CDR OPEN/CLOSE 0 button is pressed, the power is turned
on and the tray opens, but the currently selected function (3-CD
changer or CDR) does not change.
• If the power cord is unplugged from the wall socket for more
than a few seconds, the internal clock, program, etc. of the main
unit may require resetting. When this occurs, please set the
clock (and timer functions) again.
Turning the Power On and
Standby Mode
CD1 CD2 CD3
CD REC
PLAY
MODE
•
REC
REC MUTE
REC
SELECTOR
MENU
PITCH
0
CANCEL
REPEAT CD
PITCH
+
SET
PITCH–
COMPACT DISC RECORDER
RAK-PR300
CD-R/RW
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
0 10
FA DE SYNCHRO
DISC SELECTOR
_>
CONTROL
MAXMIN
PLAY MODE
PHONES
OPEN /
CLOSE
REC SELECTOR
MIX BALANCE
MULTI JOG
REC LEVEL
+
–
CANCELSETMENU
REC/
REC MUTE
SYNCHRO
CD EDIT CD REC
FINALIZE
LINECDDIGITAL
POWER
COMPACT DISC RECORDER SL-PR300
DISC
1
DISC
2
DISC
3
OPEN /
CLOSE
DISC
SELECTOR
3
2
1
LINE
CD
DISC SELECTOR
1, 2, 3
POWER
()
POWER ( )
CD1, CD2, CD3
p
pp
00
Main Unit
Remote Control
POWER
Main Unit
Remote Control
POWER
Function Operation
Main unit
Remote control
3-CD
changer
The function is set to 3-CD
changer. The CD PLAYER
indictor is shown in the dis-
play window.
If one of these buttons is
pressed when a CD is in the
corresponding CD tray, contin-
uous play starts from the CD
tray corresponding to the but-
ton pressed.
These buttons do not function
during program and random
play modes.
Main unit
(3-CD control)
3-CD
changer
The function is set to 3-CD
changer. The CD PLAYER
indicator is shown in the dis-
play window.
Main unit
(CDR control)
CDR
The function is set to CDR.
The CD RECORDER indica-
tor is shown in the display
window.
1
3
2
CD1 CD2 CD3
SL-PR300PP.fm Page 13 Thursday, August 30, 2001 1:37 PM