Filter
Top Products
English
RQT6087
Setting the Clock
Set the clock immediately after turning on the power to the main
unit for the first time. Additionally, should there be a power black-
out that lasts for longer than a few seconds, or if the AC power cord
of the unit is unplugged from the wall socket for longer than a few
seconds, please check to see if the clock needs to be reset again
before using any other operation.
• This unit uses a 12-hour clock to indicate time.
• Adjust the clock regularly to maintain accuracy.
The time can be set regardless of the unit’s power switch being
turned on or off.
Example
Setting the time to 1:15 PM when first using the system.
In case of the power on mode
1
Press the MENU button (main unit) while the
unit is in the stop mode.
If the time has not been set, the system will go directly to the “XX
HH:MM” setting (shown in the information display), bypassing the
timer settings. (The only commands that the unit accepts at this
time are the MENU, SET and JOG control functions. Pressing of
any other button such as CD Control button, CDR Control button
or the or CANCEL buttons will end the setting mode.)
2
Turn the MULTI JOG to select “CLOCK/TIMER”.
3
Press the SET button.
4
Turn the MULTI JOG control on the main unit
the hour column reads “PM 1”.
5
Press the SET button (main unit).
The hour column stops flashing and the minutes column starts
flashing.
6
Turn the MULTI JOG control on the main unit
until the minutes column reads “15”.
7
Press the SET button.
In case of the standby mode
1
Press the MENU button (main unit).
2
Follow the instructions for steps 4-7 above.
• The current time “PM 1:15” is shown in the information dis-
play.
• If the CANCEL button is pressed while setting the minutes col-
umn, the procedure returns to the previous step, and the hour
column starts flashing. This is convenient for correcting the
hour column.
Ways to change or adjust the time display
There are two different ways for accessing the time setting function
in order to adjust the time.
With the main unit in the standby mode, press the
MENU button three times.
- The present time is shown in the information dis-
play.
- Follow the instructions for steps 4-7 above.
MAXMIN
PLAY MODE
PHONES
OPEN /
CLOSE
REC SELECTOR
MIX BALANCE
MULTI JOG
REC LEVEL
+
–
CANCELSETMENU
REC/
REC MUTE
SYNCHRO
CD EDIT CD REC
FINALIZE
LINECDDIGITAL
POWER
COMPACT DISC RECORDER SL-PR300
DISC
1
DISC
2
DISC
3
OPEN /
CLOSE
DISC
SELECTOR
3
2
1
LINE
CD
3,5,7
2,4,6
1
CANCEL
(When the time is to be reset, the
present time will flash.)
MULTI JOG
REC LEVEL
+
–
SET
Time forward
Time
backward
Turn the MULTI JOG control
until “PM 1:00” is displayed.
Press the SET button.
MULTI JOG
REC LEVEL
+
–
SET
Time
forward
Time
backward
Turn the MULTI JOG control
until “PM 1:15” is displayed.
Press the SET button.
“PM 1:15” is displayed.
SL-PR300PP.fm Page 41 Thursday, August 30, 2001 1:37 PM