Filter
Top Products
English
RQT6087
Recording onto CD-R/RW Discs
• Select “CD + LINE” to mix and record a CD loaded in the 3-CD
changer with the signals from an external source via the LINE
IN terminal.
3
Press the
1
REC/REC MUTE button (main unit/
remote control) to put the CDR in the recording
pause mode.
• The remaining recording time on the disc is shown in the infor-
mation display.
4
Press the MENU button (main unit/remote
control) and use the MULTI JOG/REC LEVEL
and MIX BALANCE controls to adjust the
recording level and mixing balance while
playing the two sources. .
• Adjust the recording level so that the 0 dB display of the level
meter is not exceeded when the highest signal is applied.
• The pitch controls may be used to adjust the speed of CD play-
back for mixing and recording purposes.
• When you have finished adjusting the recording level and the
mix balance, set the sources back to the point where you want to
start recording from.
5
Press the CDR Control PLAY
p
button on the
main unit to start recording.
6
Start playback of the sources to be recorded.
To stop recording at any time
Press the CDR Control STOP s button on the main unit or the s
(stop) button on the remote control. The Play p indicator in the
display window will flash and operation stops.
CD recording level is
reduced.
Line input recording
level is reduced.
MULTI JOG
REC LEVEL
+
–
MIX BALANCE
LINE
CD
MIX BALANCE
LINE
CD
SL-PR300PP.fm Page 35 Thursday, August 30, 2001 1:37 PM