Filter
Top Products
Important:
R R
ejected calls are logged in the caller list.
Storing unwanted callers
Storing a single phone number
I
mportant:
R We recommend storing 10 digits (including
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
n From the caller list:
When a cellular phone is paired:
1 MCN CID
2 MbN: Select the entry to be blocked. a
MMENUN
R To edit the number: MbN: “Edit” a
MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the 10-digit
format. And then, press * (Save). Go
to step 4.
3 MbN: “Save caller ID” a MSELECTN
4 MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
6 Edit the phone number if necessary (24
digits max.).
7 MSAVEN a MOFFN
When a cellular phone is not paired:
1 MCN CID
2 MbN: Select the entry to be blocked. a
MMENUN
R To edit the number: MbN: “Edit” a
MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the 10-digit
format. And then, press MSAVEN. Go to
step 4.
3 MbN: “Save caller ID” a MSELECTN
4 MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
6 Edit the phone number if necessary (24
digits max.).
7 MSAVEN a MOFFN
n
By entering phone numbers:
1 MMENUN (right soft key) #217
2 MbN: “Block a single number” a
MSELECTN
3 MMENUN a MbN: “Add” a MSELECTN
4 Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
5 MSAVEN a MOFFN
Storing a range of numbers
1 MM
ENUN (right soft key) #217
2 MbN: “Block range of numbers” a
MSELECTN
3 MMENUN a MbN: “Add” a MSELECTN
4 Enter the desired number (2-8 digits).
R To erase a digit, press MCLEARN.
5 MSAVEN a MOFFN
Blocking incoming calls that
h
ave no phone number
You can reject calls when no phone number is
provided, such as private callers or out of area
calls.
1 MMENUN (right soft key) #240
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R When the unit receives a cellular call
without a phone number, the call may not
be rejected.
Setting the first ring for the call
b
lock list
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to “Off”. The default setting is “On”.
1 MMENUN (right soft key) #173
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
For assistance, please visit http://www.panasonic.com/help
41
Programming
PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 41 2014/01/09 11:59:42