Filter
Top Products
Phonebook
Y
ou can store up to 3,000 phonebook entries
and assign a name (16 characters max.) and
up to 3 phone numbers to each (24 digits max.
each). You can also assign a label to each
phone number, and assign each phonebook
entry to a group (page 28). The following
groups are available:
– Group 1: “Home”
*1
(default)
– Group 2: “Cell 1”
*1
– Group 3: “Cell 2”
*1
– Group 4-9: You can change the group
name for each group.
*1 For groups 1-3, the group names cannot
be changed.
The total number of entries that can be stored
varies depending on how many phone
numbers you have stored for each entry. Total
number of entries is shown below:
1 name + 1 phone number: 3,000 entries
1 name + 2 phone numbers: 1,500 entries
1 name + 3 phone numbers: 1,000 entries
Important:
R All entries can be shared by any registered
handset.
R You can copy phonebook entries from a
Bluetooth cellular phone to the unit’s
phonebook (page 47).
Adding phonebook entries
1 MFN W a MM
ENUN
2 MbN: “Add new entry” a MSELECTN
3 MbN: “(Name)” a MSELECTN
4 Enter the party’s name. a MOKN
5 MbN: Select the desired phone number
location. a MSELECTN
6 Enter the party’s phone number. a MOKN
7 MbN: Select the desired label. a
MSELECTN
R To store 2 or 3 phone numbers, repeat
steps 5-7.
8 MbN: Select the current setting of the
group (default: “Home”). a MSELECTN
9 MbN:
Select the desired group. a
MSELECTN
10 MbN: “<Save>” a MSELECTN a MOFFN
Storing a redial list number to the
p
honebook
Phone numbers of up to 24 digits can be
stored in the phonebook.
n When a cellular phone is paired:
1 MEN REDIAL
2 MbN: Select the desired entry. a
MMENUN
3 MbN: “Save” a MSELECTN
4 To store the name, continue from step
3, “Editing entries”, page 29.
n When a cellular phone is not paired:
1 MEN REDIAL
2 MbN: Select the desired entry. a
MDETAILN
3 MSAVEN
4 To store the name, continue from step
3, “Editing entries”, page 29.
Storing caller information to the
p
honebook
n When a cellular phone is paired:
1 MCN CID
2 MbN: Select the desired entry. a
MMENUN
R To edit the number: MbN: “Edit” a
MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the
desired format. And then, press *
(Save). Go to step 4.
3 MbN: “Save caller ID” a
MSELECTN
4 MbN: “Phonebook” a MSELECTN
5 Continue from step 3, “Editing entries”,
page 29.
n When a cellular phone is not paired:
1 MCN CID
For assistance, please visit http://www.panasonic.com/help
27
Phonebook
PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 27 2014/01/09 11:59:40