Filter
Top Products
Base unit
1 D
uring an outside call, press M
N.
R A
ll registered handsets beep.
2 Wait for the paged party to answer.
R If the paged party does not answer,
press M
N
to return to the outside call.
3 To complete the transfer, press MZN.
Transferring a cellular call
b
etween the handset and a
cellular phone
Transferring a cellular call from the
h
andset to a cellular phone
1 Press MMENUN during a cellular call.
2 MbN: “Transfer to cell” a
MSELECTN
R The cellular call is transferred to the
cellular phone.
Note:
R Depending on your cellular phone type, you
may need to set the cellular phone to be
ready to talk before transferring. For
example, if your cellular phone has a top
cover, open it beforehand.
Transferring a cellular call from a
c
ellular phone to the handset
During a conversation using a cellular phone,
the call cannot be transferred to the handset
by the cellular phone. Perform the following
with the handset.
1 During a conversation using a cellular
phone, press MCELLN.
R In the following cases, go to step 3.
– when only 1 cellular phone is paired.
– when a specific line is set to make
cellular calls (page 20).
2 MbN: Select the desired cellular phone. a
MSELECTN
3 MbN: “Transfer from cell” a
MSELECTN
R The call is transferred to the handset.
Note:
R W
hen you press MOFFN on the handset to
end the phone app’s cellular call, the call is
transferred to the cellular phone. Use the
cellular phone to disconnect the call.
Depending on the phone app, the call may
be disconnected without being transferred
to the cellular phone.
Transferring a cellular call
b
etween the base unit and a
cellular phone
Transferring a cellular call from the
b
ase unit to a cellular phone
During a cellular call, press and hold M
N
until
the MZN indicator goes out.
R The cellular call is transferred to the cellular
phone.
Transferring a cellular call from a
c
ellular phone to the base unit
During a conversation using a cellular phone,
press MZN.
R The cellular call is transferred to the base
unit.
Note:
R When you press MZN on the base unit to
end the phone app’s cellular call, the call is
transferred to the cellular phone. Use the
cellular phone to disconnect the call.
Depending on the phone app, the call may
be disconnected without being transferred
to the cellular phone.
Answering a 2nd call
I
f you receive a call while talking on the phone,
the interrupt tone sounds (page 35), and the
2nd caller’s information is displayed on the
handset if you subscribe to Caller ID
(page 44).
For assistance, please visit http://www.panasonic.com/help
25
Making/Answering Calls
PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 25 2014/01/09 11:59:40