Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1 Press MMENUN while talking.
2 MbN: “Equalizer” a MSELECTN
3 MbN: Select the desired setting.
4 Press MOKN to exit.
Note:
R Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
R When both the “Equalizer” setting and
noise reduction are activated,
is
shown on the display.
Call share
Y
ou can join an existing outside call.
n While another unit is on a cellular call:
Handset
1 To join the conversation, press MCELLN.
R You can join the conversation when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
calls (page 20).
2 MbN: Select the desired cellular phone. a
MSELECTN
Base unit
T
o join the conversation, press MZN.
n While another unit is on a landline call:
Handset
T
o join the conversation, press M
N.
Base unit
T
o join the conversation, press MZN.
Note:
R A
maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 37).
Transferring calls, conference
c
alls
Outside calls can be transferred or a
conference call
*1
with an outside party can be
made:
– between 2 handsets
– between a handset and the base unit
*1 A conference call can be established
using the handset only.
Handset
1 D
uring an outside call, press MMENUN.
2 MbN: “Intercom” a MSELECTN
3 MbN: Select the desired unit. a MSELECTN
4 Wait for the paged party to answer.
R If the paged party does not answer,
press M
N
to return to the outside
call.
5 To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: “Conference” a
MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMENUN a MbN: “Hold” a
MSELECTN
To resume the conference: MMENUN
a MbN: “Conference” a MSELECTN
R To cancel the conference: MMENUN a
MbN: “Stop conference” a
MSELECTN
You can continue the conversation
with the outside caller.
24
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls
PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 24 2014/01/09 11:59:40