Filter
Top Products
Lowrance - LHR-80 Installation and Operation Instructions46
When you have entered the last number of the MMSI, a confirmation screen appears. 4.
The cursor is at STORE, press ENTER to store your ATIS MMSI.
Enter your ATIS MMSI again as a password and check the confirmation screen appears 5.
again, select STORE and press ENTER to permanently store your ATIS MMSI and return to
the menu.
You can view your stored ATIS MMSI at anytime by selecting ATIS MMSI in the ATIS 6.
SETUP menu.
4-9-2 ATIS Select
When ATIS is enabled, the following occurs:
DUAL watch, Tri Watch and scan functions are disabled.•
The following international channels are limited to 1 watt output power:
6, 8, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74, 75, 76, 77 (AND31, if enabled)
To enable/disable ATIS:
MENU SELECT
GPS/DATA
RADIO SETUP
>ATIS SETUP
ATIS SETUP
ATIS MMSI
>ATIS SELECT
ATIS SELECT
ON
> OFF
Select ATIS SETUP, then ATIS SELECT. Press 1. ENTER to display ATIS SELECT ON/OFF.
Select ON to turn the ATIS function on. 2.
Press the ENTER to confirm your choice and return to the menu. 3.
4-10 Get Buddy
Enable or Disable data auto function (GET BUDDY)
Enable buddy mode: Radio will transmit your LL data to the opposite after you release the
PTT key, if the opposite is GET BUDDY ON also, it will show the distance and USER MMSI (or
ATIS MMSI) of the sender.
MENU SELECT
RADIO SETUP
DSC SETUP
>GET BUDDY
GET BUDDY
ON
>OFF
Select GET BUDDY and then press ENTER.1.
Select ON or OFF as required, then press ENTER to confirm the selection.2.
Note: For EU, use clone software to Enable/Disable the GET BUDDY menu.