Filter
Top Products
Lowrance - LHR-80 Installation and Operation Instructions 45
Select DSC SETUP, then LL REPLY. Then press ENTER, the MANUAL, AUTO, OFF appear on 1.
the screen.
Select your response and press ENTER to confirm and return to the menu manual. 2.
DSC SETUP
INDIV REPLY
DSC SELECT
>LL REPLY
LL REPLY
>MANUAL
AUTO
OFF
4-9 ATIS SETUP (EU only)
The submenu is used to adjust settings for the ATIS function.
Press MENU and then select ATIS SETUP, press ENTER to enter the submenu.•
4-9-1 Enter or Check your ATIS MMSI
If you are navigating in the inland waterways of Europe, then you must enter your ATIS MMSI
to access ATIS functionality.
An ATIS MMSI always starts with 9 and it sends a digital message whenever you release the
PTT button.
When you have entered your ATIS MMSI correctly, you can display it any time.
MENU SELECT
GPS/DATA
RADIO SETUP
>ATIS SETUP
ATIS SETUP
>ATIS MMSI
ATIS SELECT
INPUT ATIS
MMSI
9_____________
ATIS MMSI
9100005366
>STORE
CANCEL
ATIS MMSI
INPUT AGAIN
9_____________
ATIS MMSI
9100005366
>STORE
CANCEL
Select ATIS SETUP then ATIS MMSI and press the ENTER. If an existing MMSI is stored, the 1.
values appear.
If the MMSI is blank, a dashed line will appear, except for the initial number ’9’. Then 2.
enter ATIS MMSI along the dashed line. Press ENTER to confirm each entry and then
move to the next line.
If you make an error, press CH3. until < appears, then press the ENTER to backup and
correct the entry.