Filter
Top Products
Lowrance - LHR-80 Installation and Operation Instructions34
In radio setup menu, move the cursor to GPS/DATA and press ENTER.1.
Move the cursor to SETTING and press ENTER.2.
Move the cursor to TIME DISPLAY and press ENTER.3.
The cursor is at ON (to show the time).4.
If you want to hide the time, move the cursor to OFF.
Press ENTER to confirm the selection.5.
4-6-4 Time Offset (Local time)
If your position and time data is being updated, you can use TIME OFFSET to enter the time
difference between UTC and local time - so your local time is displayed on the screen.
TIME OFFSET
+ 03.30
12:56 PM LOC
MENU SELECT
BUDDY LIST
CONTRAST
>GPS/DATA
GPS/DATA
MANUAL
>SETTING
SETTING
>TIME OFFSET
TIME FORMAT
TIME DISPLY
Work out the time difference between UTC and your local time.1.
In the radio set-up menu select GPS/DATA and press ENTER.2.
The cursor is at SETTING and press ENTER.3.
The cursor is at TIME OFFSET and press ENTER.4.
Enter + or – followed by the time difference between UTC and your local time. Half hour 5.
increments can be used (as in this example). Local time is shown with the suffix LOC.
Press ENTER to confirm the selection.6.