Filter
Top Products
Lowrance - LHR-80 Installation and Operation Instructions42
When you have entered the last number, push ENTER to advance to the next screen. 4.
The cursor is at STORE.
Check whether the displayed MMSI is correct, then press ENTER to store, or CANCEL to 5.
backup.
Enter your MMSI again as a password check, then push ENTER to permanently store the 6.
user MMSI and return to the MENU.
You can view your stored user MMSI at anytime by selecting USER MMSI in the setup
menu.
NO MMSI ID
IS STORE!
DSC warning message.
4-8-2 Maintain Groups
You can program up to three group MMSI numbers and associated Group names. Group
MMSI numbers always begin with a zero (0). You only enter the last 8digits of the group ID
number, the intial”0” is automatically entered.
4-8-2-1 Enter your Groups
Use GROUP MMSI to create, edit, or delete 1, 2, or 3 groups of people that you call frequently.
The entries within a group are stored in alphanumeric order. A group MMSI always has nine
numbers and always starts with 0.
A group name can have a maximum of 12 alphanumeric characters.
FISHER 1
012345678
>STORE
CANCEL
DSC SETUP
USER MMSI
>GROUP SETUP
INDIV REPLY
GROUP SETUP
>MANUAL NEW
FISHING 1
GROUP NAME
GROUP MMSI
0___________
Select DSC SETUP then GROUP SETUP.1.
If this is FIRST TIME that you’re entering a group name, no group appears. Otherwise, any 2.
existing group names. The cursor is at MANUAL NEW.
Use CH 3. / to enter the new group name, one alphanumeric character at a time.
Press ENTER to confirm each correct alphanumeric character and to move to the next 4.
position.