Filter
Top Products
Lowrance - LHR-80 Installation and Operation Instructions 41
Select RADIO SETUP then NMEA OUT.1.
Select ON/OFF then press ENTER to confirm your desired choice.2.
4-8 DSC Setup (US only)
The submenu is used to set behavior of the function. Items are available for selection. Hold
down CALL/MENU then select DSC SETUP, press ENTER to enter DSC SETUP submenu in
which there are 5:
User MMSI
Group SETUP
INDIV REPLY
DSC SELECT
LL REPLY
4-8-1 Enter or check your USER MMSI
Note: You must enter your user MMSI before you can access the DSC functions.
When you have entered your MMSI correctly, you can display it any time.
USER MMSI
INPUT AGAIN
>USER MMSI
GROUP SETUP
INDIV REPLY
INPUT USER
MMSI
USER MMSI
876543210
>STORE
CANCEL
USER MMSI
876543210
>STORE
CANCEL
The cursor is at DSC SETUP and press ENTER.1.
The cursor is at USER MMSI. Press ENTER.2.
If you have already entered your MMSI, it is shown on the screen.
If this is the first time that you are entering your MMSI, a dashed line appears with the
cursor under the first position. You need to enter your MMSI along the dashed line, one
number at a time.
Press CH3. / to select the first number of your MMSI. Press ENTER to confirm the
number and move to the next position. If you make an error, select the < character then
press ENTER to backup.