Kenwood TH-D7A Portable Radio User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
57
SLOW-SCAN TELEVISION (SSTV) WITH VC-H1
Slow-scan Television (SSTV) is a popular application for
transmitting still images over the air from one station to
another. The VC-H1 is an optional portable unit which
includes all requirements for SSTV; a slow-scan
converter, a CCD camera, and a LCD monitor. You can
transmit or receive full-color images just by connecting
the VC-H1 to this transceiver. For further information on
the VC-H1, see the instruction manual for the VC-H1.
From this transceiver you can enter and superimpose a
message, an RSV report, and a call sign onto an image
on the VC-H1 monitor. You can also select colors for
those information.
Note: Use an optional PG-4V cable to connect the VC-H1 to this
transceiver. For this cable, contact your authorized KENWOOD dealer.
The cable that comes with the VC-H1 allows only image transfer from/ to
other stations.
Use the following Menu Nos. to program information and
select its color.
In addition, you can use Menu 3–8 (TX MODE) to
program a SSTV mode for the VC-H1. First connect the
transceiver to the VC-H1 and switch ON both the
transceiver and VC-H1. Press [MENU], [3], [8]. The
SSTV mode currently set on the VC-H1 appears. Press
[UP]/ [DWN] to select the desired mode, then press
[OK] to change the setting on the VC-H1. The
selectable SSTV modes are as follows:
Robot (color) 36 Robot (color) 72
AVT 90 AVT 94
Scottie S1 Scottie S2
Martin M1 Martin M2
Fast FM
Note:
Switch OFF both the transceiver and VC-H1 before making the
connection.
When the VC-H1 is too close to the transceiver, transmitting at high
power using the provided antenna may cause malfunction. This is
caused by unwanted feedback.
13LLACYM).xamstigid8(ngisllaC
23LOCLLACYMngisllacrofroloC
33EGASSEM).xamstigid9(egasseM
43LOCEGASSEMegassemrofroloC
53VSR).xamstigid01(troperVSR
63ROLOCVSRtroperVSRrofroloC
PG-4V
TH-D7 E 57 SSTV with VC-H1 98.12.4, 0:12 PM57