Kenwood TH-D7A Portable Radio User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
44
MICROPHONE CONTROL
The key functions you can assign are shown below:
Press [F] first.
1
TH-D7A only
Note:
Turn OFF the transceiver power before connecting the optional
speaker microphone.
If the LOCK on the speaker microphone is ON, you cannot
reprogram the Programmable Function keys.
]0[
lennahCyromeM
FFO/NOtuokcoL
]5[ tceles.qerftesffO
]1[ FFO/NOenoT ]6[ hctiwsMF/MA
1
]2[ tceles.qerfenoT ]7[
OFVelbammargorP
tcelesegnar
]3[ FFO/NOSSCTC ]8[
ezispets.qerF
tceles
]4[ tceles.qerfSSCTC ]9[ erotsemanyromeM
TH-D7A only
LANP
MONI
Press [ENT] first.
LANP
SQL
Press [F] first.
The optional SMC-33 or SMC-34 speaker microphone
has 3 Programmable Function (PF) keys on its top. You
can assign these keys the transceiver key functions that
you frequently use. First connect the optional speaker
microphone to this transceiver.
The defaults on the PF keys are as follows:
Mic [1]: [A/B]
Mic [2]: VFO/ Memory Recall mode switch
Mic [3]: [CALL]
1 Press Mic [1], [2], or [3]+ POWER ON depending on
which key you want to reprogram.
“PF 1”, “PF 2”, or “PF 3” appears.
2 Press a key on the transceiver depending on the
function you want to assign.
Pressing a single key on the keypad assigns only the
function printed on the top of the key.
To assign the second function (printed in purple), press
[F] first (ex. [F], [VFO]).
Pressing the PTT switch assigns the function that
switches between VFO and Memory Recall mode.
Press [F], [0] to [9] to assign the functions that are
selectable in Function Select mode.
Pressing [ENT], [0] to [9] allows you to recall memory
channel 0 to 9.
TH-D7 E 44 Microphone Control 98.12.4, 0:12 PM44