Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
35
MEMORY SCAN
Use Memory Scan to monitor all memory channels
programmed with frequency data.
1 Select the desired band.
2 Press [MR] (1 s).
• Scan starts with the channel last recalled.
• The 1 MHz decimal blinks while scanning is in progress.
• To reverse scan direction, press [UP] (upward scan) or
[DWN] (downward scan).
3 To quit Memory Scan, press [ESC].
Note:
◆
On the current band at least 2 or more memory channels must
contain data and must not be locked out.
◆
The L0 to L9 and U0 to U9 memory channels are not scanned.
◆
You can also start Memory Scan when in Channel Display mode.
While Scan is being interrupted, the channel number blinks.
VFO SCAN
VFO Scan monitors all frequencies tunable on the band,
using the current frequency step size.
1 Select the desired band.
2 Press [VFO] (1 s).
• Scan starts at the frequency currently displayed.
• The 1 MHz decimal blinks while scanning is in progress.
• To reverse scan direction, press [UP] (upward scan) or
[DWN] (downward scan).
3 To quit VFO Scan, press [ESC].
TH-D7 E 33 Scan 98.12.4, 0:11 PM35