Filter
Top Products
Operation
46
MDX-F1 (EN)
Timer operation
Contents
1 Adjust the time.
3
4
Set the ON time then the OFF time.
The time is
advanced.
The time is
returned.
÷ For each of the ON time and OFF time, enter the figure
of “hour” by performing steps 1 and 2 then enter the
figure of “minute” in the same manner.
÷ If you make a mistake, restart from step 2.
Make the desired reservation.
For timer playback or AI timer playback
1 Select the mode.
(1) Select “PLAY” or “AI PLAY”.
(2) Press the SET/Demo key.
1 PLAY .......... Timer play
2 TUNER REC
3 AI PLAY ..... Timer play with gradu-
ally increasing volume
1 TUNER ...... Broadcasts
2 CD
3 MD
4 TAPE
For timer recording
1 Select the mode.
(1) Select “TUNER REC”.
(2) Press the SET/Demo key.
3 Select the record destination.
(1)Select.
1 PLAY
2 TUNER REC
3 AI PLAY
1 MD REC
2 TAPE REC
Adjust the clock before setting the timer.
÷ When the “SET/Demo” key is
pressed, the display shows
“COMPLETE !”.
÷ When the “SET/Demo” key is pressed, the display
shows “COMPLETE !”.
2 Press the SET/Demo key.
2 Select the input source.
(1)Select the source to be
played.
(2) Press the SET/Demo key.
3 Select the broadcast station
(only when TUNER is selected
above).
(1) Select the preset station No.
2 Select the broadcast station
(1) Select the preset station No.
(2) Press the SET/Demo key.
D
e
m
o
SET
0
0
D
e
m
o
SET
D
e
m
o
SET
D
e
m
o
SET
D
e
m
o
SET
D
e
m
o
SET
D
e
m
o
SET
ON TIME
A
M
700
1
¶O.T.T. PROG.
OFF TIME
A
M
800
1
¶
O.T.T. PROG.
4 Execute the program timer
operation.
Perform steps 1 and 3 in the
procedure in “Execution and
cancellation of timer”. u
4 Execute the program timer
operation.
Perform steps 1 and 3 in the
procedure in “Execution and
cancellation of timer”. u
(2) Press the SET/Demo key.
(2)Press the SET/Demo key.