Filter
Top Products
15
Operation
MDX-F1 (EN)
Playback of CD
Contents
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Select the “CD” input. (Also press the
7
to enter stop mode.)
#
Lights
÷ Up to 32 tracks can be programmed. When “FULL” is
displayed, no more tracks can be programmed.
÷ If you made a mistake, press the CLEAR/DELETE key
and enter the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
÷ “
–
– : – –” is displayed when the total programmed
period has attained 100 minutes or more.
Press the numeric keys as shown below....
To select track No. 23 : 003
To select track No. 40 : 0000)
1 Select the track.
2 Confirm the selection.
(To select more than one track,
repeat steps 1 and 2 for each
track.)
(Go to step 2 within 8 seconds.)
Start playback.
3
÷ Tracks will be played in the order they were programmed
(following the program numbers).
÷ When the 4 or the ¢ key is pressed during play, the
program will jump to the preceding or the following track
respectively.
÷ When the 4 key is pressed once during playback, the
play position returns to the beginning of the current track
being played.
To stop playback To quit the program mode
Press in stop mode
÷ Each time the key is pressed, the
last track in the program is cleared.
(Example when the track in P-14 is
canceled)
Clearing tracks from the end Clearing all tracks
÷ The entire program is cleared.
Goes off
1
Let the “PGM” indicator light.
2
Select track numbers in the order you want to play them.
Press in stop mode
Listening in the desired sequence
(program playback)
PGM CD
05 P-01
PGM
PGM
-- P-14
PGM
TRACK NO.
01 000
PGM
PGM
123
456
789
+10 0
PGM
6
CD
7
STOP
CLEAR
/DELETE
PGM
Program position of the
track to be selected next.