Filter
Top Products
39
Operation
MDX-F1 (EN)
MD Edit Functions
Contents
1
This procedure shows you how to select and
move (insert) a track to the track number you
desire. The surrounding tracks are renumbered
automatically.
Repeating this procedure lets you arrange the
tracks in the order you desire.
Select “MOVE ?”.
Each press switches the operation.
1 MOVE ?
2 COMBINE ?
3 ALL ERASE ?
4 (Editing cancelled)
1 Press the TRACK EDIT key.
Track number to be moved
CBA ED F
DCA E FB
Select the “MD” input. (Please execute operation in stopped condition.)
*
Perform the operations in the following procedure while the display is blinking.
Image of moving one track
TRACK EDIT
SET
To abort operation, press the TRACK EDIT key again.
MOVE ?
MD EDIT
---=> --- ?
MD EDIT
2 Press the SET key.
2
Select the track to be moved.
SET
To increase
track No.
To decrease
track No.
Select the movement destination track number and
press the SET key.
002=> --- ?
MD EDIT
Moved track No.
002=> 005 ?
MD EDIT
3
Select the moving distination track.
¢4
P.CALL
SET
To increase
track No.
To decrease
track No.
Select the movement destination track number and
press the SET key.
¢4
P.CALL
4
Enter the track movement.
÷ It takes a while until the execution completes.
ENTER
COMPLETE !
5
After editing, eject and remove the mini disc.
The “WRITING” display indicates that the recorded
and edited data are written in the MD. Be careful not
to apply impact to the unit during it.
If the power cord is unplugged before completion of
“WRITING”, the recorded and/or edited data may be
lost.
With the MD, information is written in the disc when
the ejection operation is performed after editing. Af-
ter title input or editing, be sure to eject the minidisc
so that the data is written in it by “WRITING”.
Moving a single track
(TRACK MOVE)