Filter
Top Products
Operation
MDX-F1 (EN)
38
MD Edit Functions
Contents
1
2
Moving several tracks at a time
(QUICK MOVE)
The tracks can be reordered in the desired order
by moving up to 20 tracks at a time.
Select the “MD” input. (Please execute operation in stopped condition.)
*
Perform the operations in the following procedure while the display is blinking.
Press the QUICK MOVE key then the SET key.
Select the first track number of the move-
ment target range.
CBA ED F
AD
E
C
F
B
Image of simultaneous, multiple track movement
QUICK MOVE
SET
¢4
P.CALL
SET
1
2
ENTER
¢4
P.CALL
SET
COMPLETE !
QUICK MOVE?
MD EDIT
Q.MOVE AREA
001-020
MD EDIT
Q.MOVE AREA
005-024
JAZZ
005 A005
3
Select tracks numbers in the desired order.
4
Enter the track movement.
5
After editing, eject and remove the mini disc.
(Repeat steps 1 and 2 until all tracks have been
arranged in the desired order.)
To increase
track No.
To decrease
track No.
÷ It takes a while until the execution completes.
The “WRITING” display indicates that the recorded
and edited data are written in the MD. Be careful not to
apply impact to the unit during it.
If the power cord is unplugged before completion of
“WRITING”, the recorded and/or edited data may be
lost.
With the MD, information is written in the disc when
the ejection operation is performed after editing. Af-
ter title input or editing, be sure to eject the minidisc
so that the data is written in it by “WRITING”.
To move track No. 7 to track No. 5 (the first track posi-
tion in the movement target range).
Target track No.
Moved track No.
÷ The display shifts toward the right every time a track
number is set.
÷
Pressing the
11
11
1
¡¡
¡¡
¡
key allows to check the current order
of tracks.
Select the movement destination track number and
press the SET key.
To increase
track No.
To decrease
track No.
20 tracks (movement range)
Selected track No.
Select the first track number of the track movement
target range and press the SET key.
TITLE7
005 A007
TITLE8
006 A008
First track No. of move-
ment target range.
To abort operation, press the QUICK MOVE key again.
(Example)