Filter
Top Products
34
Operation
MDX-F1 (EN)
Convenient Recording Methods
Contents
Program recording
(MD
=
TAPE)
Desired MD tracks can be programmed in the desired sequence and recorded onto a tape.
Recording preparation is required.
º (Be sure to put the cassette deck in stop mode.)
1
2
Perform steps1 and 2 of the procedure in ”Lis-
tening in the desired sequence (Program play-
back)”.
™
Program the desired sequence of MD tracks.
Press the TAPE REC key twice to enter
record-pause mode.
Press the MD
6
key again.
(Start recording.)
To interrupt a recording
(Recording and playback will be
stopped.)
At the end of the recording
MD recorder : Stop.
Cassette deck : Stop is executed after an unre-
corded portion of about 4 sec. has
been produced.
÷ When the PGM key is pressed to cancel the edited
contents, the entire editing contents will be erased.
÷ Tracks programmed in excess of the tape recording time
will be cut off.
(Press twice.)
÷ Starting the MD program playback starts tape recording
by synchro recording.
•
TAPE REC
0
6
MD
0
0
7
STOP
3