Filter
Top Products
MDX-F1 (EN)
22
Operation
Playback of Mini Disc
Contents
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Select the “MD” input. (Also press the
7
to enter stop mode.)
*
Lights
÷ Up to 32 tracks can be programmed. When “FULL” is
displayed, no more tracks can be programmed.
÷ If you made a mistake, press the CLEAR/DELETE key
and enter the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
÷ “– – : – –” is displayed when the total programmed period
has attained 100 minutes or more.
Press the numeric keys as shown below....
To select track No. 23 : 003
To select track No. 40 : 0000)
1 Select the track.
2 Confirm the selection.
(To select more than one track,
repeat steps 1 and 2 for each
track.)
(Go to step 2 within 8 seconds.)
Start playback.
3
÷ Tracks will be played in the order they were programmed
(following the program numbers).
÷ When the 4 or the ¢ key is pressed during play, the
program will jump to the preceding or the following track
respectively.
÷ When the 4 key is pressed once during playback, the
play position returns to the beginning of the current track
being played.
To stop playback To quit the program mode
Press in stop mode
÷ Each time the key is pressed, the
last track in the program is cleared.
Clearing tracks from the end Clearing all tracks
÷ The entire program is cleared.
Goes off
1
Let the “PGM” indicator light.
2
Select track numbers in the order you want to play them.
Press in stop mode
Listening in the desired sequence
(program playback)
ALL
3
REPEAT
PGM
ALL
3
REPEAT
TRACK NO.
--- P-01
PGM
PGM
123
456
789
+10 0
PGM
7
STOP
PGM
ALL
3
REPEAT
TRACK NO.
--- P-02
PGM
PGM MD
ALL
3
REPEAT
007 P-01
PGM
6
MD
CLEAR
/DELETE
Program position of the
track to be selected next.
(Example when the track in P-02 is
canceled)