Kenwood MDX-F1 Portable Radio User Manual


 
MDX-F1 (EN)
28
Operation
Let's recording
Contents
Recording on MD
This unit cannot record audio in monaural mode.
MD recording is possible as “digital recording”, where the digital signal of the CD is used as it is, and as
“analog recording”, where the analog signal of a broadcast etc. is converted to a digital signal.
Let's recording
CD
CD
6
MD REC
0
2
1
3
Make the preparations for recording.
1
In the direction of the arrow
1 Open the write protect tab of the Mini Disc to make
it recordable.
p
2 Load the Mini Disc.
CAUTION
The MD cannot be loaded or ejected while the unit is in standby mode.
Do not force insert a Mini Disc during the STANDBY mode, for this
may damage the mechanism.
Select the source to be recorded.
2
TUNER (Broadcasts)
: Analog recording
CD : Digital recording
TAPE : Analog recording
÷ If a CD or tape has already been loaded, it starts to play now. Press the 7 key to stop it.
The character information display
shows the recording input source.
Example:
To select the CD input
Start recording.
3
1 Press the MD REC key (the unit enters record-pause mode).
2 When the preparation is complete, press the MD REC key
again.
3 Play (or tune) the music source to be recorded.
÷ For recording from a CD, read One-touch recording. ¤
÷ Do not apply vibrations or impact during recording.
÷ The recording onto TAPE is not available during recording onto MD.