Filter
Top Products
Operation
MDX-F1 (EN)
36
MD Edit Functions
Contents
4
After editing, eject and remove the mini disc.
The “WRITING” display indicates that the re-
corded and edited data are written in the MD. Be
careful not to apply impact to the unit during it.
If the power cord is unplugged before comple-
tion of “WRITING”, the recorded and/or edited
data may be lost.
3
Execute title assignment.
| The title scrolls.
2
Input the title.
1 Select the group of the char-
acters used in the title.
(Input the title characters by repeating 1 to 3 for
each of them.)
The following types of characters, numbers, and sym-
bols can be selected.
Press the DISPLAY/CHARAC. key as often as required
to display the desired group of characters.
÷ By pressing the 4 or ¢ key, the displayed characters
are scrolled so any character (in the same group) can be
selected.
Example of disc title
The cursor moves and waits for input of the
next character.
1 Press the ENTER key.
To advanceTo return
2 Select a desired character by
placing the selection cursor
on it.
3 Press the SET key to enter the
selected character.
2 Press the TITLE INPUT key.
The MD operates on the basis of the information
read from the disk into memory. After title input or
editing, be sure to eject the minidisc so that the data
is written in it by “WRITING”.
KEN
≤
VXY
TITLE
dISC
MD EDIT
W
EJECT
0
0
DISPLAY
/CHARAC.
¢4
P.CALL
SET
ENTER
TITLE INPUT
dISC
TR
ITLE STO E
dISC
K
ENWOOD
List of registered symbols (ASCII codes):
! “ # $ % & '( ) * + , - . / : ; < = > ? @ _ ` ˆ
÷A~Z, space (1 blank character)
÷a~z, space
÷0~9, symbols, space