Filter
Top Products
ON SCREEN DISPLAY - 45 -
1) Insert a pre-recorded video cassette into the source (playing) VCR.
2) Insert a blank video cassette, or one you want to record over, into the editing
(recording) VCR cassette compartment.
3) Press TAPE SPEED button on the remote control to select the desired recording
speed (SLP, LP or SP) on the editing (recording) VCR.
4) Select AUX position on the editing (recording) VCR. See page 11, under "Input
Select".
5) Press REC button on the editing (recording) VCR.
6) Begin playback of the tape in the source (playing) VCR.
NOTES:
• For best results during dubbing, use the VCR's front panel controls whenever possible. The
remote control might affect the playback VCR's operation.
• Always use video-quality shielded cables with RCA-type connectors. Standard audio cables
are not recommended.
• You can use a video disc player, satellite receiver, or other audio/video component with A/V
outputs in place of the playback VCR.
TO MONITOR THE RECORDING
1) Turn on the TV, and set it to the same output channel as the editing VCR channel 3
or 4.
2) Press VCR/TV button on the remote control so that the "VCR" indicator appears on
the display.
ON SCREEN DISPLAY
NOTE: Both "PWR" and "VCR" indicator must be on the VCR display for this function to work.
• To check the Remain, Count, Clock and Channel number, press DISPLAY button
on the remote control.
Each time you press DISPLAY button on the remote control, TV screen will change as
the illustration: