Filter
Top Products
- 33 -
NOTES:
To prevent tape damage, after five minutes, the VCR will automatically switch to the Stop
mode. You may review the time remaining with "" marks on the TV screen. Each "" mark
shows one minute.
RECORDING ONE PROGRAM WHILE VIEWING ANOTHER
You can record one program while viewing another. To start recording, follow steps [1]
to [3] under "VIEWING AND RECORDING THE SAME PROGRAM".
NOTE: When you record with a cable converter box, you cannot record one program while
viewing another.
4 Select the TV mode
Press VCR/TV button on the remote control to select TV so that the "VCR" indicator
disappears from the display.
5 Select the channel on the TV
Set the TV to the channel you want to watch.
TO MONITOR THE PROGRESS OF YOUR RECORDING
1 Select the VCR mode
Press VCR/TV button on the remote control so that the "VCR" indicator appears on the
display.
2 Select channel 3 or 4 on the TV
Turn on the TV and set the TV channel to the same video output channel as located on
the back of the VCR. (CH3 or 4)
IRT (Instant Recording Timer)
This function enables you to set a recording length simply by pressing the REC/OTR
button on the VCR.
Make sure...
• This function cannot be done by the remote control.
• VCR Power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel as located