Filter
Top Products
OPERATING CONTROLS AND FUNCTIONS - 11 -
6. PAUSE button-Press to temporarily stop the tape during recording or to view a still
picture during playback.
Frame Advance function-Press to advance the picture by one frame during the still
mode.
7. POWER button-Press to turn VCR on and off. Press to activate a timer recording.
8. VCR/TV button-Press to select TV or VCR mode.
VCR position: to view playback, to monitor video recordings or watch TV using the
VCR tuner.
TV position: to watch TV or to view one program while recording another.
-REAR VIEW-
Rear View Illustration
9. Remote sensor window-Receives the infrared signals from the remote control.
10. Digital display - See page 28.
11. TAPE SPEED button-Press to set desired recording speed : SP/LP/SLP.
12. CHANNEL buttons-Press to select desired channels for viewing or recording.
Tracking function-Press to minimize video 'noise' (lines or dots on screen) during
playback (only on the VCR)
Press to stabilize the picture in the Still mode when the picture begins to vibrate
vertically.
13. REC button-Press to begin manual recording.
IRT button-Press to activate Instant Recording Timer. (only on the VCR)
14. VOL button - Press to adjust the desired TV's volume level by using either or
button.
15. Mode Select buttons
• CATV button - For details, see page 29.
• TV button - For details, see page 29.
• VCR button - For details, see page 29.
16. NUMBER buttons-Press to select desired channels for viewing or recording. To
select channels from 1 to 9, first press "0" button then 1 to 9.
100/ENT button-When selecting cable channels which are more than 100, press
this button first, then press the last two digits. (To select channel 125, first press
"100/ENT" button then press "2" and "5").
17. MENU button-Press to display menus on the TV screen. (only on the remote
control)
18. DISPLAY button-Press to display the remain, the counter, or the current channel
number and current time on the TV screen. (only on the remote control)
19. SLOW button-Press to reduce the playback speed. Slow speed can be controlled
by pressing F.FWD button (faster) or REW button (slower).
20. MUTE button - Press to mute the TV's sound. Press it again to resume sound.
21. COUNTER MEMORY button- Press to set counter memory on and off.
22. COUNTER RESET button-Press to reset counter to 0:00:00. Press to add or delete
channel numbers during channel preset.
23. Power cord-Connect to a standard AC outlet (120V/60Hz).
24. AUDIO OUT jack-Connect to the audio input jack of your audio equipment or
another VCR.
25. AUDIO IN jack-Connect to the audio output jack of your audio equipment or another
VCR.
26. ANT. IN terminal-Connect to an antenna or CATV.