Filter
Top Products
PRESET FOR USE - 15 -
AUTOMATIC CHANNEL PRESET (Without a Cable Box)
NOTES:
• Follow the steps below once. Repeat it only if there is a power failure or the VCR is
unplugged for more than 30 seconds. (In these cases, the programmed channels are erased.)
• You must follow the steps below before attempting to play or record a video tape. If you want
to play or record a video tape BEFORE programming the tuner, you must first press the
POWER button to turn off the VCR. Then, press the POWER button again to turn it back on.
To program the tuner again, see "CHANNEL PRESET AGAIN" on page 14.
1 Plug in the VCR power cord
Plug the VCR power cord into a standard AC outlet.
2 Select channel 3 or 4 on the TV
Turn on the TV and set the TV channel to the same video output channel as located on
the back of the VCR. (CH3 or 4)
3 Turn on the VCR
Press POWER button to turn on the VCR. The POWER indicator on the VCR comes on.
4 Select the VCR mode
Press VCR/TV button so that the VCR/TV indicator on the VCR comes on.
5 Select "ENGLISH" or "ESPAÑOL"
Select "ENGLISH" or "ESPAÑOL=Spanish" using PLAY/ or STOP/ button.
Then, press MENU or F.FWD/ button.
LANGUAGE SELECT
ENGLISH [ON]
ESPAÑOL
6 Begin channel preset
Press MENU, F.FWD/ or REW/ button once. The tuner scans and memorizes all the
active channels in your area.