Filter
Top Products
SPECIAL PLAYBACK - 30 -
3 Enter your desired time
Press PLAY/ or STOP/ button repeatedly until your desired time appears.
(Example: "2:50" for 2 hours 50 minutes)
TIME SEARCH
2 : 50
4 Begin Time Search
Press REW or F.FWD button. The VCR begins rewinding or fast forwarding to the
specified point.
The time counts down as the searching progresses.
5 After Time Search
When 0:00 is reached, the VCR will start playback automatically.
NOTES:
• Time Search can be set up to 9 hours 59 minutes (9:59).
• This function will not operate in the recording mode.
• Procedures must be followed within 30 seconds, from steps [2] to [3]. Otherwise the Time
Search mode will be cancelled.
• To exit the Time Search mode, press the MENU button after step [3]. Or press STOP button
after step [4].
• A video cassette must be inserted in the VCR for this function to work.
BLANK SEARCH
This function enables you to search for the unrecorded portion of the tape in the forward
direction.
• Tape must be fully rewound.
1 Select "SEARCH SELECT"
Press MENU button on the remote control repeatedly so that the SEARCH SELECT
menu appears.
2 Select "BLANK SEARCH"
Press PLAY/ or STOP/ repeatedly to point to "BLANK SEARCH".