Filter
Top Products
TIMER RECORDING - 41 -
• If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock
setting and all timer settings are lost.
• If the tape runs out before the end time, the VCR will switch to the Stop mode
immediately, eject the tape and the VCR power will be turned off. The "" indicator will
flash.
• If a tape is not inserted or the erase-protection tab is removed, the "" indicator
flashes and automatic timer recording cannot occur. Insert a tape that allows recording.
• The TV that is connected to your VCR may be turned ON or OFF when the VCR is in
the timer-record mode.
• When you record a cable channel program with cable converter box, first set the
VCR's channel to 3 or 4 whichever is the output channel of your cable converter box.
Then set your cable converter box to the channel you want to record and leave on while
you are recording with power on.
AUTO RETURN
If you select auto return to [AUTO] from the menu, when all the timer recordings are
completed, the VCR will rewind to the beginning of the recorded programs(s).
Make sure...
• If there are any remaining programs including Daily & Weekly, this function will
not be done.
1 Select "VCR SET UP"
Press MENU button repeatedly so that the VCR SET UP menu appears.
VCR SET UP
TAPE SELECT ~T130
AUTO REPEAT
RENTAL
AUTO RETURN
2 Select "AUTO RETURN"
Press PLAY/ or STOP/ button repeatedly to point to "AUTO RETURN".
3 Select "AUTO"
Press F.FWD/ button so that [AUTO] will appear next to "AUTO RETURN".
VCR SET UP
TAPE SELECT ~T130
AUTO REPEAT
RENTAL