Filter
Top Products
COPYING A VIDEO TAPE - 44 -
PLAY
SP REMAIN - : - - ~T130
Note:
• The Remain Time Mode calculation will start when the cassette tape is inserted and PLAY
button is pressed.
While calculating, the TV screen shows as illustrated.
REMAINING TAPE RUNNING TIME DISPLAY
• Since the reel diameter and tape thickness are not common to all cassettes, the time
count differs from cassette to cassette. Use the time display as an informative number
only.
• During recording, the remaining tape running time is estimated based on the current
recording mode (SP, LP, SLP).
• During playback the remaining tape running time is calculated based on the current
playback mode.
• Remain time will not appear on TV screen while in the Fast forward or Rewind Mode.
• There will be a delay of up to 1 minute before the remain time appears on the TV
display.
Note:
The use of the following tapes will result in difference between the displayed remaining time
and actual time to the end of the tape:
• Tape housed in a VHS-C cassette adapter.
• Shorter tape length such as a 10-minute cassette.
• T-180 cassette. In this case the display may read 2 Hours, 40 Minutes at the starting point in
SP mode.
• An exact remaining tape running time might not be displayed with T-180 and longer-play
cassette tapes or different types of cassette tapes.
COPYING A VIDEO TAPE
Connect the editing (recording) VCR, source (playing) VCR and your TV using the
following diagram.
EXAMPLE: The editing (recording) VCR is this unit. The source (playing) VCR is
another VCR.