Filter
Top Products
PRESET FOR USE - 14 -
A/V TERMINALS
If your TV has A/V input jacks, you may connect your VCR's AUDIO/VIDEO OUTPUT
jacks to the audio/video input jacks on back of your TV.
Direct audio/video connections usually result in a better picture and sound quality for
tape playback. Please see your TV's owner's manual for A/V input connections.
INSTALLING THE BATTERIES
1) Open the battery compartment cover by pressing the cover on the remote unit in the
direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated
by the polarity (+/–) markings.
3) Replace the cover.
Note to CATV system installer
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the
NEC that provides guidelines for proper "grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of
cable entry as practical.
PRESET FOR USE
Channel memory programming is NOT needed when connected to a cable box. You
can program the tuner to scan only the channels you receive in your area. See page 33
for channel designations.
NOTE: You must use the remote control for this procedure.