Filter
Top Products
PRESET FOR USE - 23 -
2 To begin playback
Press PLAY button.
PLAY
NOTE: If any menu is activated on the TV screen, the PLAY button on the remote control does
not function. Press MENU button to clear the menu. Then, press PLAY button.
If a tape is already in the VCR with power off
2A) Using button on the VCR
Just press PLAY button on the VCR. Power will automatically turn on and playback will
start. (Direct Button Operation)
2B) Using button on the remote control
Press POWER button to turn on, and then press PLAY button on the remote control.
3 To stop playback
Press STOP button.
PICTURE SEARCH
This feature is useful in finding or skipping over a particular scene on a tape. In this
mode, the sound will be muted.
1) You may view a video tape at a high speed in either a forward or reverse direction by
pressing F.FWD or REW button. (in the SP / LP / SLP modes)
2) Depress it again, the VCR will now search in super high speed. (in the LP / SLP
modes only)
3) Press PLAY button to return to normal speed.
STILL PICTURE
You can view a still picture on the screen during playback (the Still mode). Press
PAUSE button during playback. Press PLAY button to return to playback.
NOTES:
• You can advance the picture by one frame by pressing the PAUSE button repeatedly during
the still mode.
• If it is left in the Still mode for more than five minutes, the VCR will automatically switch to the
Stop mode.
VERTICAL HOLD CONTROL
When the picture begins to vibrate vertically, stabilize the picture by pressing CHANNEL