Filter
Top Products
Reglatory Compliances
Altitude 300-2™ Getting Started Guide 53
result in illegal operation and may cause harmful interference to other
systems.
• This device employs a radar detection feature required for European
Community operation in the 5.0 GHz band. This feature is automatically
enabled when the country of operation is correctly configured for any
European Community country. The presence of nearby radar operation may
result in temporary interruption of operation of this device. The radar
detection feature will automatically restart operation on a channel free of
radar.
• The 5.0 GHz radio’s AutoChannelSelect/SmartSelect setting described in the
PoE WLAN switch software manual must always remain enabled to ensure
that automatic 5.0 GHz channel selection complies with European
requirements. The current setting for this feature is found in the 5.0 GHz
Radio Configuration Window as described in the PoE WLAN switch software
manual.
• The Altitude 300-2
TM
wireless port with integral antenna and the Altitude
300-2
TM
wireless port with certified detachable antennas may be used to
transmit indoors and outdoors in all countries of the European Community
within the go to http://www.extremenetworks.com/go/rfcertification.htm
for the most up to date limitation and restrictions.
• The Altitude 300-2
TM
must be operated indoors only when using the 5150-
5350 MHz bands due to European spectrum usage rules.
• The Altitude 300-2
TM
wireless port with detachable antenna must only be
used with Extreme Networks certified antennas.
• In Italy the end user must apply for a license from the national spectrum
authority to operate this device outdoors.
• In Belgium outdoor operation is only permitted using the 2.46 - 2.4835 GHz
band: Channel 13.
• In France outdoor operation is only permitted using the 2.4 - 2.454 GHz
band: Channels 1 - 7.