Filter
Top Products
Altitude 300-2™ Getting Started Guide 43
D Reglatory Compliances
Overview
The Altitude 300-2
TM
wireless port is manufactured by Extreme Networks in
four configurations called requlatory domains. Each regulatory domain
includes countries that share similar regulatory requirements. Please refer to
the table below for these requlatory domains and there coresponding countries
or go to http://www.extremenetworks.com/go/rfcertification.htm for the most
up to date information. It is the responsability of the end user to obtain the
proper Altitude 300-2
TM
requlatory domain for use in the intended country of
operation.
The end user is also responsible to install the latest version of software made
available by Extreme Networks to ensure compliance with country
requirements and restrictions within each system installation. Since countries
are opening up new frequencies and changing output power limits it is
advantageous to maintain the latest software version to take advantage of these
improvements. Please consult the software manual of the PoE WLAN switch
for detailed instructions for installing and upgrading software.
NOTE
The Altitude 300-2
TM
is configured and managed by the PoE WLAN switch
connected to the Altitude 300-2
TM
. Please consult the software manual of the
PoE WLAN switch to properly configure the Altitude 300-2
TM
.
NOTE
Go to http://www.extremenetworks.com/go/rfcertification.htm for the most up to
data list of countries the Altitude 300-2 has been certified to operate within.