18 Altitude 300-2™ Getting Started Guide
Altitude 300-2™ Wireless Port Introduction
WARNING!
The Altitude 300-2
™
is not secured to the bracket unless a padlock is used. If
a padlock is not used the unit should be secured to the bracket by a cable tie
through the lock hasp to keep it from falling. Failure to secure the unit is
hazardous.
• One computer lock cable for securing the Altitude 300-2
™
when the
universal mounting bracket is not used.
• Box hanger for installing the Altitude 300-2
™
above the tiles of a
suspended ceiling.
• External antenna(s) for the Altitude 300-2d
™
. Extreme Networks' external
antennas can be ordered separately.
Software Description
The Altitude 300-2
™
receives its software and configuration from the Summit
300
™
switch. A description of the software and the wireless port's configuration
is in the Summit 300
™
manual.
The Summit 300
™
switch requires ExtremeWare 6.2a.1.1.0 (or later) in order to
recognize the Altitude 300-2i
™
Wireless Port.
The Summit 300
™
switch requires ExtremeWare 6.2a.1.1.1 (or later) in order to
recognize the Altitude 300-2d
™
Wireless Port.