Filter
Top Products
14 Altitude 300-2™ Getting Started Guide
Altitude 300-2™ Wireless Port Introduction
Hardware Description
Altitude 300-2
™
Models And Connections
The Altitude 300-2
™
wireless port box comes in two models. The first, the
Altitude-2i
™
, is a unit with integrated, dual band antennas and the second, the
Altitude-2d
™
, is a unit with external antenna connectors. Both models have the
same radios and overall feature set. Altitude-2i
™
is for indoor deployment only.
Altitude-2d
™
, together with an Extreme Networks external antenna, may be
configured as indoor use where both the Altitude-2d
™
and the external antenna
are deployed indoor, or as outdoor use where the Altitude-2d
™
is installed
indoor and the external antenna is placed outdoor.
Figure 6 shows the rear side of the
integrated antenna model of the
Altitude 300-2i
™
. The Ethernet
cable is plugged into the RJ45 jack.
It supplies both network
connectivity and power to the
unit. The Altitude 300-2i
™
can be
locked by either a standard
computer cable lock inserted in to
the cable lock hole or a padlock in
the tab provided for it.
Figure 1: Rear View of Altitude 300-2i
TM
Figure 2 shows the back of the
external antenna model of the
Altitude 300-2d
™
. Like the other
model there is an Ethernet RJ45
jack, a standard computer cable
lock hole and padlock hole.
Connectors for external antennas
are on the back of the unit. The two
RP-TNC connectors attach to
802.11b/g antennas and the two
RP-SMA connectors attach to
802.11a antennas. Two connections
are provided for each radio to
support signal diversity.
Figure 2: Rear View of Altitude 300-2d
TM
Ethernet
Jack
Padlock
Hole
Computer Cable
Lock Hole
1
2
802.11b/g
RP-TNC
Connectors
802.11a
RP-SMA
Connectors
1
2